[Towertalk] 205CA settings

[PY2YP]

HelloAll,

I've found some frequencies settings for the 205CA. The table bellow is the N6BV settings for 
14.175 accordingly with an e-mail found on this reflector.

		4.0000	1.2500	  1.1250   0.8750	 0.6250  0.4375 
0,0 3.6250  	41.8750 	 46.0000	 50.5000	24.0000 57.3750
72.0000  3.6250	32.3750 	 46.0000  50.5000 24.0000 53.1250 144.0000 3.6250	32.3750 	
 46.0000  50.5000 24.0000 45.1250 218.0000 3.6250	14.1250 	 46.0000	 50.5000 24.0000 
62.0000 408.0000 3.6250	14.1250 	 46.0000	 50.5000	24.0000 53.7500 

I'm understanding that the first column gives the distance from the boom in this order:
0.00 	Reflector
72.0 	Driven
144.0 	Director 1
218.0	Director 2
408.0	Director 3

At the second column 4.0000 corresponds to the central conection diameter and 3.625 is it's 
lenght.

At the third column 1.250 is the element first section and 46.000 is the elements lenghts for 
this section.

At the last column 0.4375 is the element tip diameter and the data bellow is the sections 
elements length.

So, if I'm understanding it right the antena will have the following dimensions:

Boom lenght = 218.0

0.00 	from the boom end, Reflector 	= 223,3750 inches
72.0 	from the boom end, Driven 		= 209,6250 inches
144.0 	from the boom end, Director 1	= 201.6250 inches
218.0	from the boom end, Director 2 	= 200.2500 inches
408.0	from the boom end, Director 3 	= 192.0000 inches

Am I doing right? For my sad surprise Hy Gain didn't ship the manual togheter the antenna.

Thanks in advance for any help.

73 DX de PY2YP - Cesar
http://www.cwsp.org.br
mailto:py2yp@pobox.com