[Towertalk] Newbie help with coax routing

[Richard M. Gillingham]

Seems to me you could also remove a light of glass and either have a 
glazier put the piece of aluminum you've prepared the same size as the 
glass in the frame.  or do it yourself..    and continue as below...
Just a thought.
73
Gil, W4PJI

Pete Smith wrote:

> At 09:56 PM 5/6/02 -0400, Zac Smith wrote:
>
>> check with either andrew or cell-xion
>
>
> Those folks will inflict serious financial pain.  I went down to my 
> local highway department maintenance yard and begged a road sign with 
> a bullet hole (or something) in it.  Cut a piece to fit in a wooden 
> frame that my window clamps down on.  Drilled the aluminum (quite 
> soft) for bulkhead connectors for coax and Jones jacks for rotator 
> cables.  Attached my station ground to the plate and voila -- a 
> disconnect panel and entry panel in one.
>
>
> 73, Pete N4ZR
>
> Check out the World HF
> Contest Station Database at
> www.pvrc.org
>
>
>
>
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>