[Towertalk] Refurbishing Trt-banders

[Jim Smith]

If the clamps you are talking about are like the ones on the TH3 in 
which a screw presses against the outer element forcing a dimple into 
the inner element, do what Hy-Gain says and drill the dimples out. 
 However, you have may have to use a much bigger drill size than they 
recommend in the TH3 manual.  Worked for me on TH3.

Hope this helps

de Jim Smith    VE7FO


James R. Duffey wrote:

>  Taking
>apart those old Hy-Gain joints made with the compresion clamps can be very
>hard. Does anybody know a simple way to do this? - Dr. Megacycle KK6MC/5
>