[Towertalk] 2 element vertical phased arrays

Kevin Adam n9iww2@verizon.net
Sat, 16 Nov 2002 07:27:31 -0500


Comtek has the information in his Manuals for two element phased array.

he will help you as much as he can gives all dimensions that are needed for two'er
N9IWW


On 16 Nov 2002 at 4:22, Alfred J. Frugoli wrote:

> I would like to develop some gain on 80M.  I have the ability to put
> up two shortened verticals (such as HF2Vs) and phase them.  The
> spacing would not be optimum (1/4 or 1/2 wl) but rather a compromise
> dictated by where I can hide the verticals.  I assume I'll need to
> fiddle a little with the phasing lines to get a reasonable pattern
> since the spacing will not be optimal.
> 
> My questions are:
> 
> Any suggestions as far as whose "box" to use.  Both Array Solutions
> and ComTec have a box that will work.  Comtec's is much cheaper, but
> is there a compromise?
> 
> Any articles or resources for 2 element arrays?  I see lots for 4
> squares, but not much at all for 2 element arrays.
> 
> Thanks in advance.
> 
> 73 de Al, KE1FO
> 
> _______________________________________________
> AN Wireless Self Supporting Towers at discounted prices, 
> See http://www.mscomputer.com 
> 
> Wireless Weather Stations now $349.95. Call Toll Free, 
> 888-333-9041 for additional information.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk