[Towertalk] Rohn 25 Guy Bracket/Torque Arm Question

[Jon Ogden]

I just went and took a quick look at the tower.  The assembly is not resting
on a horizontal step of the Z-truss.  I don't know how we missed that.  It
sure makes sense.

So....does it need to be fixed?  That's the BIG question here.

73,

Jon
NA9D


on 9/18/02 6:34 AM, Jerry Kincade at w5kp@swbell.net wrote:

> The "standard" Rohn guy bracket at the midpoint of my R45 does nestle down
> against the z-braces so it cannot slip, but the device that the guy wire
> attaches to resembles a single giant chain link, and are only about 4" long
> or so. They are not "flat steel pieces about a foot long" as described. Mine
> is an actual guy bracket, not a torque arm assembly. I understand torque
> arms were not available for several years because of their questionable
> benefit, but have been reintroduced by Rohn in response to popular ham
> demand, so the confusion might just be in terminology. Sounds like he has an
> early version of R25 Torque Arms instead of a guy bracket. In any case, I
> certainly agree it would make sense that it fit down against the cross
> braces in such a manner as to prevent slipping down, no matter what.
> 73, Jerry W5KP


-------------------------------------
Jon Ogden
NA9D (ex: KE9NA)

Life Member: ARRL, NRA
Member:  AMSAT, DXCC

http://www.qsl.net/ke9na

"A life lived in fear is a life half lived."