[TowerTalk] Recommended T-Bearing for a 25G

[kce]

depending on the antenna load there is a bearing available from most TV
parts distributors for around $40 that slips over the top of rohn towers. I
used one for years with a
a-3 and a a-3w without problems. I think yaesu makes two different models
that also slip over the top of a rohn top section.
ken w8ob
----- Original Message -----
From: "Dino Darling" <k6rix at arrl.net>
To: <towertalk at contesting.com>
Sent: Wednesday, April 09, 2003 1:57 PM
Subject: [TowerTalk] Recommended T-Bearing for a 25G


> My friend will need a bearing for the top of his 25G.  The top section
> comes to a point so my thinking was to lower the rotor plate and install
an
> accessory plate with the bearing mounted to it.  Or, is there a bearing
> that goes over the top tube?
>
> Suggestions are appreciated!
>
> Dino...k6rix at arrl.net
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>