[TowerTalk] driving ground rods

[AA6DX]

Here's a brand new big hammer drill for $69 --- I have one .. 73, Mark
AA6DX
http://tinyurl.com/iz0x
----- Original Message ----- 
From: "Jim Harris" <jimsportal at netscape.net>
To: <nq4i at contesting.com>; <towertalk at contesting.com>
Sent: Monday, August 04, 2003 9:22 AM
Subject: Re: [TowerTalk] driving ground rods


> You can rent one with the right size bit for less than $5.00 an hour
> from a well supplied tool rental place.
>
> Jim,  AB0UK
>
> nq4i at contesting.com wrote:
>
> >Hi all...I found at a pawn shop a rather large hammer drill....I have a
> >connection that I place over the ground rod and it takes approx 2-4
minutes
> >in almost any soil....and it was only $60.....de Rick n4i
> >
> >_______________________________________________
> >
> >See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> >
> >_______________________________________________
> >TowerTalk mailing list
> >TowerTalk at contesting.com
> >http://lists.contesting.com/mailman/listinfo/towertalk
> >
> >
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>