[BULK] - Re: [TowerTalk] Old coax connectors . . .

[Bill Turner]

>It's easy to test for
>> Teflon: Use a propane torch to apply heat to the center pin for about ten
>> seconds.  Teflon will take this just fine, and nothing happens.  If it's
>> plastic, it melts and that's the end of the connector. 

_________________________________________________________

Why destroy the connector?  If it looks like Telfon (opaque white),
touch a very hot iron to the plastic.  If it doesn't melt, it's
Teflon.  If it does melt - a tiny little spot - it's not Teflon, but
it's still usable for lower power.

-- 
73, Bill W7TI