[TowerTalk] Guy Wire distance

[Lee Buller]

I think that you will get a response from many....do what the manufacture recommends in the specs of the tower.
 
Usually, my rule of thumb is that the guys have to be out from the tower at 60% of its height.  Now, the lower guys you might want to change that because there will be a lot of cable hanging on the lower guys.  You can push those in and make a 45 degree guy point.  In other words, guy the bottom two at 100% of the height at the guy point on the tower and make the top two at 60% of the height of the guy point on the tower.
 
Now, there are a lot more experienced people on the list than me....so listen to them as well.
 
Lee - K0WA


rum <ccrum at dot11net.com> wrote:
I'm new to the list so this may have been asked before, but I'm thinking 
about putting up a 150 ft tower in the near future. Does anyone know how 
to calculate the distance away from the tower and number of guys (in 
elevation) required for such a structure. Sorry, this is my first tower 
so this is all new to me.

Regards,

Cameron

_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk