[CQ-Contest] RE: [TowerTalk] coax cables

[Steve Katz]

> N connectors are another sotry. Maybe it's because I rarely use them, 
> but I always have trouble getting it to screw together. Seems that 
> rubber spacer is too wide. If anyone can tell me what the problem is 
> there, I'd appreciate it.
> 
> //Type N pieces all fit together easily if the cable end is properly
> trimmed.  If you have trouble getting the nut seated because it seems the
> rubber gasket is in the way, it's about a 99% sure thing that you have
> left too much dielectric exposed during the cable prep operation.  The
> normal amount of dielectric that should be exposed after the pin is
> soldered on and the braid is folded back over the cone washer is "none."
> Or, at least very, very little.  I think 3/64" is the recommended
> distance.  I shoot for "nothing."  -WB2WIK/6
> 
> 
> Barry, W2UP
> 
> 
> 
> 
> On 5 Feb 2003 at 9:18, j.a.hermans wrote:
> 
> > 
> > ----- Original Message -----
> > From: "Steve Katz" <stevek at jmr.com>
> > To: <discreetly_confidential at yahoo.com>; <towertalk at contesting.com>
> > Sent: Tuesday, February 04, 2003 9:51 PM Subject: RE: [CQ-Contest] RE:
> > [TowerTalk] coax cables
> > 
> > 
> > >
> > > Hi Chuck,
> > >
> > > I don't know who Paul is (my name is Steve) but I think this was
> > > directed towards me.
> > >
> > > I agree with you.  Any time I see someone using a soldering "gun"
> > > for a PL-259 installation, I cringe.
> > >
> > I agree.
> > Assembling and soldering a PL should'nt be done elswhere then in a
> > workshop, with adapted tools. A few hundreds one after an other in the
> > ideal conditions is OK. It's a very critical operation if you dont
> > want cold solder which break at the first occasion, or burned joints
> > which have a transfert resistance of a few  M ohms .........Soldering
> > guns !!!!!!!! throw them away, you will be unable to control the right
> > temperature. Use a N type, sure you will have better results for
> > years. By the way, nowadays one can find PL to be mounted as N-type. (
> > at least in Germany ). Have been in charge of ANGRC and other military
> > production  for a couple of years in the late fiftees.......
> > 
> > Jos on4kj
> > 
> > 
> > 
> > > 73,
> > >
> > > Steve, WB2WIK/6
> > >
> > > > Paul,
> > > >
> > > > You hit the nail right on the head solidly and
> > > > quite soundly.
> > > >
> > > > The operative word is 900W iron!
> > > >
> > > > HEAT HEAT HEAT!! Raise the mass of metal to the
> > > > operating temp QUICKLY and then do the job. Too
> > > > may hams use a 125W gun and wonder why it takes
> > > > forever and they burn the coax, melt the
> > > > dielectric and short the inner to the outer
> > > > conductor!
> > > >
> > > > I work in MiL Quality world and I inspect this
> > > > stuff on a daily basis aside from being NASA
> > > > solder certified and nuclear industry solder
> > > > certified.
> > > >
> > > > HEAT HEAT HEAT!!  Nothing beats a GOOD PROPERLY
> > > > sized gun/iron!
> > > >
> > > > Huzzah for the excellent post!
> > > >
> > > > 73
> > > >
> > > > Chuck k3FT
> > > >
> > > > Give me that Old Time Mil-STD-454 requirement 5
> > > > anytime!
> > > >
> > > >
> > > >
> > > > __________________________________________________
> > > > Do you Yahoo!?
> > > > Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> > > > http://mailplus.yahoo.com
> > > _______________________________________________
> > > TowerTalk mailing list
> > > TowerTalk at contesting.com
> > > http://lists.contesting.com/mailman/listinfo/towertalk
> > >
> > 
> > 
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk at contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> 
> --
> Barry Kutner, W2UP              Internet: w2up at mindspring.com
> Newtown, PA                     Frankford Radio Club
>         
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk