[TowerTalk] antenna and rotator control box

[on4kj]

I sure am Steve.
Looking out quit a time yet, and even thought to do it myself but .
I did'nt until today because I would use to much Hardware hi.

Jos on4kj



----- Original Message -----
From: "Steve" <ve3tu at rac.ca>
To: <towertalk at contesting.com>
Sent: Saturday, February 08, 2003 7:33 PM
Subject: [TowerTalk] antenna and rotator control box


> This is directed to single op multiband contesters. I plan on building a
> micro processor control for antenna selection and rotator control. The
> number of band antennas, stacking combos and rotators are starting to
> grow to the point where some automation is required. I would like to
> know if there is any interest from other contester for such a
> controller. Would some one be kind enough to cross post this to the
> contesting reflector.
>
> gl es 73 Steve VE3TU
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>