[TowerTalk] 204BA to 18 mhz...

[Robert]

December 1990 QST page 59 has the information for putting the 204BA on
18 mhz.  It uses only 21 feet of the boom.  That same information is now
included in the newer 204BA assembly manuals.  I sent that information
to David VK3EW direct.  If someone else needs it, feel free to contact
me.  Also, I also have 20 meter operation optimizing info for maximizing
either forward gain, front to back or bandwidth.

73, Robert - AI7M 

 
Date: Tue, 28 Jan 2003 08:00:23 -0800
From: Steve Katz <stevek at jmr.com>
To: "'David McAulay  (VK3EW)'" <davidew at alphalink.com.au>,
   towertalk at contesting.com
Subject: RE: [TowerTalk] 204ba to 18 mhz.?
Message-ID: <DC6063575EF1D4118C300050040D2E93634B4B at mail.jmr.com>
Content-Type: text/plain
MIME-Version: 1.0
Precedence: list
Message: 4

You might contact Neil, K6SMF about this if you don't find an article
anywhere.

He runs a converted 204BA on 17 meters and it works exceptionally well.
He used the whole boom length and changed all the element lengths and
spacings per, I believe, the formulas in the W2PV Yagi Antenna book.

WB2WIK/6

"Success is the ability to go from failure to failure with no loss of
enthusiasm." -Winston Churchill

> -----Original Message-----
> From:	David McAulay  (VK3EW) [SMTP:davidew at alphalink.com.au]
> Sent:	Tuesday, January 28, 2003 5:31 AM
> To:	towertalk at contesting.com
> Subject:	[TowerTalk] 204ba to 18 mhz.?
> 
> Hi All
> Wonder if someone can tell me where i might get some info
> on using a Hygain 204BA on 18 mhz.
> 
> I was told one of the magazines had an article on it.
> 
> Would you know which one.?
> 
> Thank you
> 
> 73 David VK3EW.
> 
> 
> 
> _______________________________________________

Thanks, Robert