[TowerTalk] BCI to analyzers tuning transmatches

[Dan]

Hi Don: One of the locals here(K7OX) tried the 731 and it didn't give him
enough attenuation in his strong BCI environment. We finally used an MFJ
noise bridge with a battery powered SW receiver and no problem tuning his
tower on 160. 73, Dan, N5AR
----- Original Message -----
From: Don K5AQ <donhall at myriad.net>
To: Rob Atkinson, K5UJ <k5uj at hotmail.com>; <towertalk at contesting.com>
Sent: Wednesday, January 29, 2003 6:22 PM
Subject: Re: [TowerTalk] BCI to analyzers tuning transmatches


> The MFJ unit is the 731 and it can be tuned to null the BC station. I have
a
> 10KW AM station less than a mile from me so measurements are real fun,
> particularly on 160.
>
> The unit can be used with any analyzer if you can get a way to null the
> station. I recommend it.
>
> I have no connection with MFJ other than using some of their products with
> mostly good results other than their grid dip adapter which never worked
for
> me.
>
> 73  Don  K5AQ
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk