[TowerTalk] Tower Surveying Tools?

Bill Aycock baycock at direcway.com
Mon Jun 9 16:32:26 EDT 2003


Rick- forgive me, but your geometry is off- that second tape will locate a 
point on a diameter directly across from the first point.(2 radii = 1 diameter)
Bill
At 08:31 AM 6/9/2003 -0700, you wrote:

> >
>
>It is easier to just use tape measures simulateously
>to triangulate.  This avoids drawing arcs on the ground.  For example,
>mark the first guy point at the correct radius and arbitrary angle,
>then pull one tape measure from the guy point and another from the
>tower center.  Move them around until they cross each other so that
>the one from the tower center is the correct radius and the other
>reads twice as much.  That is the next guy point.
>
>Rick N6RK
>
>_______________________________________________
>
>See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
>Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
>any questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk

Bill Aycock - W4BSG
Woodville, Alabama 


More information about the TowerTalk mailing list