[TowerTalk] need source of chimney mount hardware

[Steve Katz]

For chimney straps, probably "nobody," or certainly nobody I've ever found.
I'd find chimney straps having large brackets with enough metal area to
re-drill for 2" U-bolts, to accommodate a 2" mast, if that's what you have.

Remember chimneys were designed to exhaust smoke and not support
antennas...be careful.  -WB2WIK/6

"Success is the ability to go from failure to failure with no loss of
enthusiasm." -Winston Churchill

> -----Original Message-----
> From:	Jim Spears [SMTP:n1nk at cox.net]
> Sent:	Thursday, May 22, 2003 10:45 AM
> To:	towertalk at contesting.com
> Subject:	[TowerTalk] need source of chimney mount hardware
> 
> I want to put a 6 and 2 meter yagi on my chimney.  right now I have the
> radio shack hardware which will work just fine with 1.25 mast.  This is
> too
> light, who makes hardware that will take, say, 2.0 inch mast?
> 
> Jim
> N1NK
> x CY0/N1NK (2002)
> 
> 
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk