[TowerTalk] Rotor control line switching

[Jim White, K4OJ]

sounds to me like trouble waiting to happen...

A remote relay/switch box is one more thing outside to go wrong....

I just replaced a control cable run with some house wiring this weekend 
- 250 feet of house wiring was less than 30 bucks....

K4OJ



K4FJ at aol.com wrote:

> I am interested in ways to use a common rotor control box (T2X) with multiple 
> T2X rotors.  A remote switching box would enable me to avoid multiple runs of 
> rotor cable as well as a desk full of rotor control boxes.  I am not aware of 
> anything available commercially, but I may be out of touch.  I don't mind 
> building a remote switch box but I would like to do so with a proven design.  
> Your thoughts are appreciated.
> 
> 73,
> 
> Steve, K4FJ
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>