[TowerTalk] Ground through wall

[Chuck Dietz]

How about cutting off a length of copper ground rod and use clamps on both
ends?  all available at HD

Chuck W5PR

----- Original Message ----- 
From: "Gene Bigham" <jbigham2 at kc.rr.com>
To: <TowerTalk at contesting.com>
Sent: Tuesday, November 11, 2003 12:39 PM
Subject: [TowerTalk] Ground through wall


I went the Radio Works route of station ground, and have a heavy cable to
the wall behind my tuner with a large copper lug on it to a stainless bolt
running through the plate to the outside, where in similar fashion there is
another lug on a heavy cable to a ground rod located just outside.  My
question is, I would like to replace the stainless bolt/washer/lock washer
arrangement with something brass or copper but cannot find at Home Depot or
hardware here.  Is there such a thing, this is a quarter inch or so sized
bolt that is 5 1/2 inches to 6 inches long.
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk