[TowerTalk] Ground through wall

[AA6DX]

Here's brass all-thread ... 73, Mark  AA6DX
http://tinyurl.com/ukut
Have you tried the plumbing department at your ACE is the Place place?

----- Original Message ----- 
From: "Gene Bigham" <jbigham2 at kc.rr.com>
To: <TowerTalk at contesting.com>
Sent: Tuesday, November 11, 2003 10:39 AM
Subject: [TowerTalk] Ground through wall


I went the Radio Works route of station ground, and have a heavy cable to
the wall behind my tuner with a large copper lug on it to a stainless bolt
running through the plate to the outside, where in similar fashion there is
another lug on a heavy cable to a ground rod located just outside.  My
question is, I would like to replace the stainless bolt/washer/lock washer
arrangement with something brass or copper but cannot find at Home Depot or
hardware here.  Is there such a thing, this is a quarter inch or so sized
bolt that is 5 1/2 inches to 6 inches long.