[TowerTalk] intermod filter for 2M

[Dave NØRQ]

I use the PAR VHF TN 152-158 on my IC-2720H, which has a rather loose
2m receive.  It fixed my problem completely.  If your interference is from
the
notched freq ranges, you'll be happy with it.
http://www.parelectronics.com/amateur.htm

Dave NØRQ
n0rq-1 at dfwair.net


----- Original Message ----- 
From: "David Giuliani" <David at Giuliani.org>
Subject: [TowerTalk] intermod filter for 2M


>
> I got some ugly QRM/N on 2 meters in the Seattle area with my Yaesu
FT-51R.
> I'm thinking an intermod filter would be a good investment.  I've noticed
> several on the web:
>
> -- Par Electronics - notch filter centered on paging frequencies.
>
> -- Vectronics VEC-813/814 band pass filters, about $60.
>
> -- MFJ-714 - looks same as above, $60
>
> -- DCI filters (Canada), 4 pole filter, $99 ($169 for 2m/70cm version)
>
> Experience with any of these?  Recommendations?
>
> David WA6PXX