[TowerTalk] Ham IV and my TX-472

[Ed Williams]

Hello All,  I have a TX-489 and the T2x rotator will just fit in the
upper section and can be lowered all the way.  There is only one
position that the unit will lower though.  I had to rotate the unit
until I found the spot there it would fit between the x-braces (but it
did fit).  I think the TX-472 and TX-489 have the same top section so
you might give it a try.  If you need more information email me at
kn4kl at arrl.net

73 de KN4KL ed 

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of
Dave_Hoaglin at abtassoc.com
Sent: Thursday, October 16, 2003 2:34 PM
To: Dave Hachadorian
Cc: towertalk at contesting.com
Subject: Re: [TowerTalk] Ham IV and my TX-472


The RD-1800 has the same footprint as the T2X, but not the same profile.
When I replaced my T2X with an RD-1800 (about a year ago), fitting it
through the braces of Rohn 45 was a tight squeeze (much tighter than the
T2X).

73, Dave K1HT


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk