[TowerTalk] 40m-4 klm
Don Havlicek
n8de at thepoint.net
Thu Oct 16 23:37:50 EDT 2003
The reinforcement is at the _middle_ of the boom [at the boom-to-mast
bracket] where there are NO swaged joints, NOT at the joints present
along the boom.
Don
N8DE
Rauh, Michael J (Mike) wrote:
> Ages ago, K4ISV recommended reinforcing the boom of the KLM 40M4 by
> inserting a smaller diameter tube inside the boom. Has anyone done this?
> My 40M4 has swaged boom joints. If I make the insert small enough diameter
> to pass through the joints, the tube will not be in contact with the inside
> of the boom, except at the joints. Will this strengthen or stiffen the
> boom?
>
> Mike Rauh NV7X
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
More information about the TowerTalk
mailing list