[TowerTalk] Stacked 4 El SteppIR's
Bryan Rambo
bryanr at bometals.com
Fri Sep 12 06:34:32 EDT 2003
Cool idea, Jim. Not sure you could steer the elevation pattern enough to be
meaningful though. I just modeled a pair of yagis stacked 60ft apart (using
the 20m 5 el yagi that comes with EZNEC 3) and adjusted the driven-element
length 20 inches long on one yagi and 20 inches short on the other. This
only steers the takeoff angle up by one degree.
Very interesting idea though...
73 - Bryan W4WMT
-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com]On Behalf Of Jim Lux
Sent: Thursday, September 11, 2003 4:22 PM
To: k2hk at arrl.net; kg6i at direcway.com
Cc: towertalk at contesting.com
Subject: Re: [TowerTalk] Stacked 4 El SteppIR's
Theoretically (horrible word that, sometimes), you could do some
interesting stuff by deliberately tuning one driven element a bit long and
the other a bit short. When combined, they'll have a good match, but one's
phase will be shifted relative to the other. This would allow you to scan
the main lobe in elevation, which might be useful, particularly on a high
angle path.
It also might let you put a null at some particularly annoying elevation
angle (probably the more useful feature).
Mind you, I have no idea how you'd go about adjusting all the other
elements in a practical way. One could have some sort of modeling program
with an optimizer, the output of the modeling program used to drive the
element actuators. The real problem, as I see it, is that there's often a
great difference between model and reality, and, then, between what you
think is the optimum pattern, and what actually is.
Getting it to be fast enough to be convenient would also be tricky. Even
on a fast computer, optmizing the yagi element lengths takes some amount of
time.
Perhaps a better approach would be to precalculate element configurations,
and then have another (virtual) knob that sets elevation, along with the
rotator knob to set azimuth.
Think of it as a control box for 8 elements instead of just 4.
Jim, W6RMK
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list