[TowerTalk] Info abt. KT34XA plus 2el 40m same boom?
Don Havlicek
n8de at thepoint.net
Sun Aug 15 19:50:46 EDT 2004
One other choice .... you can suspend the 40m elements below the KLM
boom .. using two pieces of aluminum angle ... and some U-bolts to fit.
A Gamma match would preclude needing to insulate the driven element.
Don
N8DE
DL2OBO Carsten Thomas Dauer wrote:
> Hello
>
> Thank you for reading
>
> I have a KLM KT34XA on a 24m high crank up tower.
>
> Is there anyone who tried to interlace a 2 element 40m Yagi on the same boom with the KLM ? Seperate coax feed is ok.
>
> I can't install a seperate Yagi above the KLM because of the windload.
>
> A Yagi below with a ringrotor is also not possible because of an 80m 4-Square which is around the tower.
>
> I know how to calculate and build the 2 element, but I don't know how this will influence the tribander. Has anyone ever done this with NEC ?
>
> Any info about this is very welcome.
>
> TOM DL2OBO/DF0EE
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
More information about the TowerTalk
mailing list