[TowerTalk] EZ-WAY RBS-40 TOWER

[Jim.Tolar at Fluor.com]

I have a data sheet copy (don't remember the source) for the EZ-Way towers.
For the RBS-40, the following data is shown:

Extended feet = 41
Retracted feet = 25
Max antenna load, with tower not guyed (projected area in ft/sq of antenna)
= 12 ft/sq, with 50 mph winds
Max antenna load, with tower guyed (projected area in ft/sq of antenna) =
12 ft/sq, with 100 mph winds

There is no data about the projected area of the tower itself.

Hope this is helpful.

W5SQE



----- Original Message -----
From: <asciibaron at comcast.net>
To: <towertalk at contesting.com>
Sent: Monday, August 23, 2004 1:44 PM
Subject: [TowerTalk] EZ-way RBS-40 wind speed and load


> i need documentation that details the wind speed and wind load
information
for the EZ-Way RBS-40 tower.  i can not get a building permit without this
information.  my goal is to put an A3 on the tower along with a few wires
for 40 and 80.
>
> if anyone has this or knows of a source, please let me know.
>
> -steve
> KB3KAQ











JAMES H. TOLAR, P.E.
PRINCIPAL ELECTRICAL ENGINEER
ONE FLUOR DANIEL DRIVE
SUGAR LAND, TX 77478-3899
TEL: 281-263-3417
FAX: 281-263-4167
EMAIL: jim.tolar at fluor.com




-----------------------------------------------------------------------------------------------------
The information transmitted is intended only for the person
or entity to which it is addressed and may contain confidential
and/or privileged material. If you are not the intended recipient 
of this message you are hereby notified that any use, review,
retransmission, dissemination, distribution, reproduction or any
action taken in reliance upon this message is prohibited. If you 
received this in error, please contact the sender and delete the 
material from any computer.  Any views expressed in this message
are those of the individual sender and may not necessarily reflect 
the views of the company.  
-------------------------------------------------------------------------------------------------------