[TowerTalk] radials for shunt fed tower
Rick Bullon
kc5ajx at hotmail.com
Sun Dec 5 16:32:12 EST 2004
----Original Message Follows----
From: w7kxb at comcast.net
To: <w2lk at earthlink.net>, <Jamesnf at aol.com>,
<rf at xemaps.com>,<towertalk at contesting.com>
CC: Les Kalmus <w2lk at earthlink.net>
Subject: RE: [TowerTalk] radials for shunt fed tower
Date: Sun, 05 Dec 2004 17:57:09 +0000
Thanks for the Heads Up. Found it
at:http://www.ncjweb.com/k3lcmaxgainradials.pdf
Carry on
BillH
=============================================================
The question I have about this is how do I tell if my ground is excellent
good or poor??
If I just assume that I have poor ground conductivy here and use the max
length for 160 that is about 16000 ft of wire.
In another thread on here I believe the price of a 500ft spool of wire at
the big box stores was about $14 a spool that would make the radial system
cost about $450 dollars!!! and then there is all the time and work of
putting down 100+ radials
73
Rick
kc5ajx
More information about the TowerTalk
mailing list