[BULK] - RE: [TowerTalk] taping coax to tower parts

[Steve Katz]

> must not have been very good galvanizing.  I have used electrical tape
> for 20 years on rohn towers and the only difference when I remove it is
> that the galvanizing is shinier under the tape.
> 
> ::Ditto here.  Only problem with taping coax to tower legs is that tower
> legs are a lot harder than coax (other than hardline) and pulling
> overlapping layers of tape can crush many types of coax, rendering them
> more prone to failure than before taping.  I use gentle wraps spread over
> 6" of cable or so, rather than pulled-tight wraps all overlapping in the
> same place.  Crushed too much coax that way over the years.....-WB2WIK/6
> 
> 
>