[TowerTalk] Emoto 1300SMAX Rotor

[Masa Miura, AJ3M]

Brad, 

Contact Emotator Corporation directly.  The company's phone number is 81(country code).47.367.2916.  Its mailing address is 12-6 Matsudo Matsudo City, 271-0092 Japan according to the company's ad in the August 2004 issue of the Japanese CQ Ham Radio magazine.  It does not include an email address.     

73, 

Masa Miura, AJ3M
Bethesda, MD
http://minokobo.com/je2ywy/aj3m/
   

  ----- Original Message ----- 
  From: Brad Pioveson W9FX 
  To: towertalk at contesting.com 
  Sent: Tuesday, December 14, 2004 8:49 PM
  Subject: [TowerTalk] Emoto 1300SMAX Rotor


  Greetings, fellow TowerTalkians.  I have an Emoto 1300SMAX rotor and 
  controller on my bench for repairs for unknown maladies ('it doesn't work'). 
  Info on this rotor is a bit sparse - I have what purports to be a photocopy 
  of a manual, but, that sadly lacks much needed info.

  Anybody have any doc's on these critters?  Anybody know of a parts 
  distributor?  Or, does anybody simply have any experience with these they'd 
  be willing to share?  So far, I know that the grease in this monster is the 
  consistency of 5 minute epoxy after 10 minutes of UV exposure and that 
  there's a motor run cap buried in the motor housing that is shot.  The AC 
  motor, which wants to see about 100VAC, couldn't begin to turn the 
  gears...there's simply not enough torque to break the grease adhesion!

  Thanks for any help y'all can offer.

  73

  Brad Pioveson, W9FX
  FX Rotor Works
  www.fxrotorworks.com 

  _______________________________________________

  See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

  _______________________________________________
  TowerTalk mailing list
  TowerTalk at contesting.com
  http://lists.contesting.com/mailman/listinfo/towertalk