[TowerTalk] Can anyone identify this tower?

[n8de at thepoint.net]

Steve,
That's a Universal Aluminum Tower.
With 18" at the base, tapering as you go upward [looks like three tapers].
Universal Tower is manufactured in :
30"  26"  22"  18"  14"  11"[really 10"] and 7".
The tower in the picture looks like 18"/14"/11"/7" .. AND, if it's really
60' tall .. the rated windload is LESS THAN 4 square feet!!
Don
N8DE

> I don't think the current owner really know what it is.  He says it's made
> by "Roan Tower Co"  and it's a "pro 60".  (Of course Rohn Towers doesn't
> have a 'pro 60' model that I can find.
>
> He also says it's aluminum, but it doesn't look aluminum per the picture.
>
> Other facts (as stated by current owner):
>
> 60 foot (10 ft sections)
> Measures 18 inches at base, tapers up from there.
> Tilt over (from the base)
> Non-guyed
>
>
> Here are the pictures (I promise these two links will not produce
> pop-ups):
>
> www.urmc.rochester.edu/tower1.jpg
>
> www.urmc.rochester.edu/tower2.jpg
>
> Thanks in advance for your help.
>
> Steve
>
>
>
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>