[TowerTalk] Problems on a 2el vertical Array
Rick Karlquist
richard at karlquist.com
Fri Jan 9 10:29:11 EST 2004
Mark Beckwith said:
> Where you may not be realizing your model is: The model probably
> allocates power equally (50/50) between each vertical, right?
You don't want the power to split equally. You
want equal element currents. Typically, the rear
element receives only a small percentage of the
power thru the coax, being almost parasitic.
Feed the verticals with 1/4 wave lines and get
the voltage at the feed end of the lines equal.
Then the currents will be equal.
Rick N6RK
More information about the TowerTalk
mailing list