[TowerTalk] help on monster rotor controller

[BlakeM]

Forwarding the following at the request of K4VUD who's now in HS.  Contact
him at his e-mail address below for further info.....

73,
Blake N4GI

> >Hey big rotor users.... a friend here in HS land wants to sell two sets
of
> >HyGain rotor controllers he has ... these odd things show up over here...
> >Price is also in question...
> >
> >1.  In-shack rotor control head HyGain model DRC-2 in a 19 inch rack
about
> >4 inches tall... 240 or 120 VAC via switch... checked here functional....
> >has computer interface socket and manual control also... looks brand new
> >and still has its box.
> >
> >2. Other unit is a remote control head mounted in a butch weather proof
box
> >(even with filtered dual air circulation breathing ports) also VAC
> >switchable... this box looks like what u would put near the base of the
> >tower if u wanted to turn the rotor without going back into the shack...
> >would also function alone, I think. Seems to have controls dup of above.
> >Not tested but looks brand new.   Marked 871883-1 and the controller p c
> >board inside has the number 75181-3 Rev 3.
> >
> >Any massive rotor junkies out there that can advise E20JPJ, owner of said
> >gear, about who may want these items and what they are worth to a ham????
> Found some info at www.usantannaproducts.com/products_r_3503.html with
> photos of DRC-2 controler.  Note, there is no rotor motor itself
> available... just the controllers.
>
>   Big thanks and 73
> >
> >Charly, now HS0ZCW,
> >
> >Charles Harpole
> >k4vud at hotmail.com
> >
>
>