[TowerTalk] Erections
Jan Erik Holm
sm2ekm at telia.com
Wed Jul 14 13:44:11 EDT 2004
Forget about washers or tread lock stuff. Properly done
the bolts/nuts should be installed to the correct torque
using a torquewrench.
A good idéa is to use ordinary flat washers out of very hard
steel under each nut.
73 good luck / Jim SM2EKM
--------------------------------------------------------------
K8fu at aol.com wrote:
> Regarding my earlier lockwasher question. This is a 90' steel self supporting
> twr.
> At this juncture of my life there are times when I can barely walk let alone
> climbing 90' every 3 yrs to ck bolts.
> It seems to me that with the addition of lock or star washers this could be a
> set it and forget it operation.
> Even though this is a self supporting twr with not a lot of windloading I do
> intend to affix a torsion bar at the top to prevent the twr from twisting and
> torque.
>
> Froggy K8FU
> Take a Frog To Lunch Tomorrow
More information about the TowerTalk
mailing list