[TowerTalk] Cutting slots in aluminum tubing ?

[rkstover at mchsi.com]

If your cutting clamping slots in the ends of tubing a hacksaw kerf is plenty.
If you want longitudinal slots then a milling bit in a drill press will work 
as long as you don't get rambunctious pushing the tubing through.


--
R. Kevin Stover, NØRKX

Systems/Networking
Iowa Quality Beef LLC
3337 L. Ave.
Tama, IA 52339

e-mail: 
kstover at iowaqualitybeef.com, 
rkstover at mchsi.com