[TowerTalk] Hole Digging Question

[K3SV, Bill Gillenwater]

If this is an experienced operater and a good size scoop, no problem. It was
easy to assemble the forms and very little out of square. Also depends on
what you hit when you are digging.

73 Bill

----- Original Message ----- 
From: "Pat Chiles" <chilesp at adelphia.net>
To: <towertalk at contesting.com>
Sent: Thursday, July 22, 2004 10:26 AM
Subject: [TowerTalk] Hole Digging Question


I will be starting a tower project in about a month.  It will be a 72 FT
crank-up and the specs call for a foundation that is 5ftx5ftx8ft.  Is it
reasonable to expect a back-hoe operator to be able to dig this size whole
without elongating it beyond 5ftx5ft?

Pat, K8PC
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk