[TowerTalk] Grounding, Lightning & corona discharge

[Dave NØRQ]

I, too, have telco entering one corner of house (where the shack is),
tower/coax in the opposite, and power on the other side of garage.

It would take quite a bit of work (trenching, digging) to bond them all
together.  But if I did do that, what material would a person use
-- #4 (or #2, or #6) copper?  It would be over 100' of the stuff to connect
all the ground rods together (2 outside the shack, 2 for power,
and 8 under the tower).

-- 
Dave NØRQ



----- Original Message ----- 
From: "Alan NV8A (ex. AB2OS)" <nv8a at att.net>
To: "Tower Talk List" <towertalk at contesting.com>
Sent: Thursday, July 29, 2004 10:34 AM
Subject: Re: [TowerTalk] Grounding, Lightning & corona discharge


> Similar here, in a 30-yr-old ranch-style house in W Michigan: Elec. at
> one end, gas and phone at the other, cable and dish at the back. I am
> working on getting those grounds bonded together.
>
> Alan NV8A