[TowerTalk] Fw: Create Rotor Repair/Reply
Mike Bragassa
bragassa at txucom.net
Thu Jun 10 07:39:00 EDT 2004
----- Original Message -----
From: "Overseas Div./Creative Design Corp." <overseas at cd-corp.com>
To: "Mike Bragassa" <bragassa at txucom.net>
Sent: Wednesday, June 09, 2004 9:51 PM
Subject: Re: Create Rotor Repair/Reply
> Dear Mr. Mike Bragassa:
>
> We are sorry for those customers like you who puchased our
> products when need repair, obtaining spare parts etc. as we do
> not have dealer who can give repair service in U.S. (but sales
> representative only).
>
> When repair is in need, there are 2 ways, to send it (them)
> all the way back to us from your side and return it to you again
> from us (that costs you too much as the forwarding cost will
> additionally be taken to you for back and forth.) and or repair
> by users (The parts are shipable either direct or indirect).
>
> For your reference, although reparing service is disable,
> contact the following company for obtaining products (or parts)
> as they are our sales distributor in U.S at the present.
>
> NCG COMPANY
> 1275 North Grove Street,
> Anaheim, California, 92806-2114, U. S. A.
> Atten: Mr. Mick Stwertnik
> Tel: 714-630-4541 / Fax: 714-630-7024
> E-Mail: micks at cometantenna.com
>
> Thanks and regards,
> Y. Nishimura
> Creative Design Corp.
>
>
>
>
>
> > -------- Original Message --------
> > Subject: Create rotor repair
> > Date: Wed, 9 Jun 2004 13:41:36 -0500
> > From: Mike Bragassa <bragassa at txucom.net> <mailto:bragassa at txucom.net>
> > To: <email at cd-corp.com> <mailto:email at cd-corp.com>
> >
> > I have 5 Create Amateur radio rotors. Where in North America can we get
> > these things fixed, should it be necessary??
> >
> > Mike Bragassa, K5UO
> > Conroe, TX USA
>
>
>
More information about the TowerTalk
mailing list