[TowerTalk] Cutting cross brace on Rohn 65

KJ6RA kj6ra at starband.net
Fri Mar 5 14:10:55 EST 2004


Thanks for that idea Roger, that might be a possibility. The consensus
is DON'T cut the brace. That was my original thought also, but thought I
would ask. If they had the PST 61's in stock and could deliver in a
timely fashion this question would not be necessary, as that was the
original plan and it would have fit with no problems.

Thanks Rich

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Tower (K8RI)
Sent: Friday, March 05, 2004 1:58 PM
To: KJ6RA; towertalk at contesting.com
Subject: Re: [TowerTalk] Cutting cross brace on Rohn 65


You may be able to turn the motor by removing the bolts to the gear case
and positioning it horizontally.  I had to do that with mine.

A word of warning, that gear head is full of oil and I'd call the
company about doing the move.  I did on mine and it works fine. At least
it has for the past two years.


> I am looking for some opinions on possibly cutting one cross brace to 
> accommodate a rotator.
>
I would not cut the cross brace


Roger Halstead (K8RI, EN73 & ARRL Life Member)
N833R, World's Oldest Debonair (S# CD-2)
www.rogerhalstead.com

> The problem I have is IF I mount a Big Boy PST71 in this tower (Rohn 
> 65) the motor protrudes in such a way, that I would have to cut one 
> cross brace to allow room for the rotator motor mounting. The question

> is, would this have any greatly negative aspects. My initial thought 
> was I really didn't want to do that, but thought I would see what 
> others may have done in a similar situation.
>
> The tower is a 60 foot self-supporting Rohn 65 and the rotor would be 
> mounted at the 50 foot joint, where the last section bolts on.
>
> Thanks much for your input.
>
> Rich  KJ6RA
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", 
> "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com 
> http://lists.contesting.com/mailman/listinfo/towertalk
>


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk




More information about the TowerTalk mailing list