[BULK] - [TowerTalk] Motorola Connectors

[Steve Katz]

Those darn no-coders!  Oops, wrong place.

I've seen the cable extensions (Motorola female one end, right-angle male
installed on the other end) at my local car stereo/alarm installer's shop.
If you have such a shop near you, you might check there.

-WB2WIK/6






Sorry this a slightly little off topic (but not nearly as much as ISO9001
compliance). Anyone know where I can get right-angle motorola
connectors (e.g. the standard male car radio connector). Specifically
I need something that will change a long straight Motorola male
plug into a right-angle that makes a nice sharp turn (there isn't
much room between the firewall of my Ford pickup and the back
of the radio. A short jumper cable with a Motorola female jack on
one end and a Motorola right angle male on the other end would
do nicely. I recently got an antenna switch (see its sorta appropriate
for TowerTalk) that goes between my car radio and the factory
antenna , and the switch uses a long straight male plug which won't
clear the firewall.

Thanks,

Mike, W4EF............................