[TowerTalk] Rotor Control Cable

[Al Williams]

Sent: Tuesday, May 25, 2004 6:24 PM
Subject: [TowerTalk] Rotor Control Cable


> Could someone tell me a good place to order 8 conductor wire for 180
foot
> run. I need at least two of the wires to be 16 gauge.
>
> Thanks,
> Tom N4XVP
>

Don't forget --maybe the cable type  depends on the rotator system
design
e.g. the possible need to keep cross coupling from happening between
the motor drive current wires and the position sensing wires.

k7puc