[TowerTalk] Conduit ends?

[Eugene Jensen]

Being a Electrician by trade the easy way is to buy a 1 lb brick of duct
seal and it just like putty and molds it around the cables and stuff it down
the conduit. It's cheep quick and very easy to remove when one wants to add
another cable run. 73 Gene K2QWD

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com]On Behalf Of Paul Ash
Sent: Monday, November 01, 2004 8:11 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Conduit ends?


Hello All,

I have been considering running my coax, antenna
selector control cable and rotor control cable through a 3"-4"
inch conduit. I would like to get some opinions on the best
way to handle the ends that are projecting out of the ground.
I did read a former thread that talked about two 90 deg bends
(sounds good for water/rain.) what about bugs/rodents/varmints etc...
Anyone have a good idea how to seal the ends that would still provide
passage of the cables and could be removed with a minimum of effort
whenever it comes time to replace or add to the cables?

Thanks!

73,

Paul W4QG
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk