[TowerTalk] Rotor plates

[Cqtestk4xs at aol.com]

In a message dated 11/4/04 1:23:36 PM Greenwich Standard Time, 
jmaass at columbus.rr.com writes:
Cold galvanizing will probably not hold up
against moisture in that application (threads
will wipe it away), but you can start there.

What do others suggest?
How about a liberal dose of lithium grease at the hole.  If you put it in the 
bolt hole of the rotor too, it also helps corrosion from freezing it bolt in 
the hole.

Bill K4XS