[TowerTalk] Rotor Control??

[Keith Dutson]

A simple method is to build a switch that controls a relay that connects the
rotor to both control boxes.  The relay should be six pole, or you could use
two or three smaller relays in parallel.  The switch should be wired like a
"hall" light switch, giving each operator independent control.

Not sure how the pointer would like this wiring.

Keith NM5G

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of k2qmf at juno.com
Sent: Tuesday, September 28, 2004 4:14 PM
To: towertalk at contesting.com
Cc: yccc at yccc.org
Subject: [TowerTalk] Rotor Control??

Hello All,

I would like to connect two rotor control units in parallel.  Units like for
the Ham4 or T2X, etc.

The reason is to be able to control the same rotor from two different
operating positions

Has anyone tried this or does anyone have any thoughts or suggestions along
these lines ?????????

Many Thanks in advance for any suggestions.

73,  Ted  K2QMF

________________________________________________________________
Get your name as your email address.
Includes spam protection, 1GB storage, no ads and more Only $1.99/ month -
visit http://www.mysite.com/name today!
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk