[TowerTalk] Rohn 55 base adaptor

K7LXC@aol.com K7LXC at aol.com
Sat Apr 2 07:17:35 EST 2005


In a message dated 4/1/2005 9:34:54 PM Pacific Standard Time, 
towertalk-request at contesting.com writes:

Recently lost my second 70', 18" face Glen Martin tower to yet another 
"freak" windstorm.
    Sorry to hear that. 

    First question, did you file a claim with your insurance company? I 
imagine you did but just checking.

    Next, are the GME towers that bad that you've had TWO of them fail?!? I 
would say there are literally hundreds - or thousands - of Rohn guyed towers 
that survive similar conditions.


I'd like to try something that's a little less impressed with freaks, so am 
considering Rohn 55, which is also 18" face, but (I've been told) considerably 
stronger.
    Yep. While 55 is the same outward size as 45, the 55 has thicker legs. 
And since tower strength is a function of leg capacity, they're stronger.


The first problem would be that I would like to use the existing concrete and 
steel base from the GM to mount the Rohn 55.

The base is considerably beyond the specs provided by GM.

I have three 7/8" studs, spaced 21" apart in a triangle.  The studs are just 
over 2.25" above the concrete.

I have no knowledge of Rohn towers or Rohn bases, but it would seem to me 
that there may be a Rohn 55 base that I could (safely and well) adapt to my 
existing concrete and steel assembly.
    There is a flat plate mount available for the 55. Cut new holes in the 
plate to fit your existing anchor rods and you're good to go.

    If one or more of the anchor rods are in the wrong place for your needs, 
it's easy enough to chop off the existing ones, drill a hole in the concrete 
with an impact drill, and then epoxy in some new ones. 

Cheers,
Steve     K7LXC
TOWER TECH -
Professional tower services for commercial and amateur
Cell: 206-890-4188


More information about the TowerTalk mailing list