[TowerTalk] Self-supporting Tower

Blake Bowers bbowers at townsqr.com
Mon Apr 11 13:01:27 EDT 2005


Not sure from the description if it is a self supporter, nor if there
is anything above the 72 foot level, but....

72 feet high, 75 feet from the power lines.  Figuring the arc of
the fall, he is close, but very possibly far enough away to avoid
the power lines.

The house at 20 feet is pretty much a given, people put towers next
to their house all the time.




>I sure hope you are not at the mike when that tower comes down onto the
> power lines. Your has to be one of the riskiest installations I've ever 
> seen
> described on TowerTalk. How did you ever get approval from your local
> authorities?
> 73 and may the good Lord protect you,   Jerry K3BZ
>
> ----- Original Message -----
> From: "Tom Martin" <tmartin at chartermi.net>
> To: <towertalk at contesting.com>
> Sent: Monday, April 11, 2005 12:18 PM
> Subject: [TowerTalk] Self-supporting Tower
>
>
>> I have been following this thread with a vested interest.  I have a 72
> foot Heights tower located in the only place on the city lot where the XYL
> would allow it to be erected.  It is in the back of the lot next to the
> garage and 25 yards from the utility lines that run parallel to the tower
> down the alley.  The tower is also 20 yards from my two story house. 
> There
> are no guys but I increased the size of the concrete base (4X7), added
> square tubing at each joint with 8 inch bolts running vertically to safe
> guard the "egging" problem with the bolt holes at each leg joint, and 
> added
> extra horizontal struts where each section joined.  The original design
> didn't have any horizontal bars.  All of this extra welding was done by a
> professional aluminum welder.
>>




More information about the TowerTalk mailing list