[TowerTalk] need info on ham2/cd44 rotator

[Wayne Greaves]

The CDR model TR-44 uses terminals 1 thru 7 only.  Connect controller 
terminal 1 to rotator terminal 1, 2 to 2,  3 to 3, etc.  There are number 
identifiers for each screw on the terminal strips.  They're small, but they 
are there.

>From the schematic the pin functions are:

1 - Meter to position potentiometer wiper
2 - 14 VDC to position pot
3 - Capacitor to motor winding one
4 - 24 VAC to motor winding one (switched)
5 - 24 VAC to motor winding two (switched)
6 - Capacitor to motor winding two
7 - Return path for AC/DC

Wayne, WØZW

----- Original Message ----- 
Subject: [TowerTalk] need info on ham2/cd44 rotator


>A ham friend recently "found" his subject rotator in his "infamous" garage 
>that he purchased new some 20 odd years ago and has never installed it. 
>However he can't find the manual and needs hookup information.  Both the 
>controller and the rotator have 8 number pin connections so he will 
>appreciate anyone that can furnish how to connect them together.
>
> He probably will sell the rotator so any information as to its 
> specification and value will also be appreciated.
>
> thanks
>
> k7puc