[TowerTalk] LMR 400

[Keith Dutson]

Should not be a problem soldering PL259 to LMR400.  But use a really sharp
knife to cut the jacket.  It is very hard.

73, Keith NM5G

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Tom Anderson
Sent: Monday, August 08, 2005 10:29 PM
To: towertalk reflector
Subject: [TowerTalk] LMR 400

Fellow Tower Talkians:

I recently bought 100 feet of LMR 400 to feed a 2m/400 vertical on top of my
tower at 70 feet.  Going to have to cut it to feed it through the wall and
solder on a new PL259 once I get it through the wall feed through.  Any
problems soldering it, getting LMR 400 into a PL259?  Been using RG213 in
the past.  I had heard rumors that soldering LMR400 could be a pain?

Tom, WW5L






_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk