[TowerTalk] half square ground screens

doc kd4e at verizon.net
Wed Aug 10 09:19:12 EDT 2005


Are the joints on that wire properly welded?  Poor welds and/or
rubbing wire could become diodes generating lots of noise.  Also,
how well will that stuff stand up in the soil in your area?  In
some soils certain fencing material disintegrates quite rapidly.

Given that your base is at 10' above ground have you considered
building a shed with a steel roof directly underneath it?  ;-)

doc

 > mike l dormann wrote:
> hark - all you antenna enthusiasts out there, i have just put up a 40m
> half square, voltage fed, with the  bottom of the vertical wires about 10
> feet off the ground. i was thinking of either putting some radials out
> from the fed end, or i have a piece of 3 foot wide rabbit cage fencing (
> zinc coated wire , 1 inch square holes) about 20 feet long.


-- 
Thanks! & 73, doc kd4e

           |_|___|_|
           | | & | |
              {|
      /\      {|
     /  \     {|
    /    \    {|
   /   @  \   {|
   |   |~_|~~~~|
   |   -| |    |
============\ #   http://bibleseven.com/kd4e.html
     KD4E     =========================================
West Central Florida
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


More information about the TowerTalk mailing list