[TowerTalk] pr25g

[David Robbins K1TTT]

Sounds like a good fit to me.  It is not unusual to find 25g legs bent by
more than that in shipping.  Sounds like time for a piece of pipe over the
end of the leg and a little elbow grease to make them line up exactly.  It
also wouldn't surprise me if the pr25g was a bit misaligned and could
benefit from a bit of grease itself.


David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 

> -----Original Message-----
> From: towertalk-bounces at contesting.com [mailto:towertalk-
> bounces at contesting.com] On Behalf Of W7QEB at wmconnect.com
> Sent: Sunday, August 14, 2005 20:12
> To: towertalk at contesting.com
> Subject: [TowerTalk] pr25g
> 
> I have tried to install standard 25g section to the pr25g. The uprights
> are
> 1/32" too wide to accommodate 25g standard section
> 
> Jim/W7QEB
> 
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk