[TowerTalk] YAESU G-1000SDX Rotator

[Chuck Kresge]

The dial lamp in my G-1000SDX rotator control unit burned out. I opened the
unit and found the lamp which is PL1 and part number 125 and described as an
axial lamp. It is a clear glass cylinder 3/4 inches long and 1/8 inches in
diameter. It has a filament inside and pigtail leads on each end. From the
schematic it appears to be powered by 10 volts AC.

Can someone provide info on where to obtain a replacement lamp?

Thanks very much-Chuck Kresge DU3NXE du3nxe at mozcom.com