[TowerTalk] Rotors for TX-455

[va3pl at cuic.ca]

Bill
I have Ham IV on my TX455 and it fits top section no problem.
You have to extend top section manually (when towet is in horizontal
position) to the point that braces will allow insertion of the rotor. I
forgot but also I think you need to remove the rotor shelf before installing
the rotor.
73 de Andy - VA3PL


----- Original Message ----- 
From: "Welch, William Robert,M.D." <WRWELCH at PARTNERS.ORG>
To: <towertalk at contesting.com>
Cc: <truro at capecod.com>
Sent: Friday, January 07, 2005 7:54 AM
Subject: [TowerTalk] Rotors for TX-455


> What rotors work well in USTowers' TX-455?  The T2X will not fit and it
appears
> a Ham IV (8" dia) will not make it in the 7 1/8" ID of the top section.
Ants
> will be at least a tribander (e.g., Explorer 14, KT34M2 or SteppIR 3L)
plus 3L
> WARC. Thanks, Bill K1CN
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>