[TowerTalk] kt34xa torque balancing

[Michael Harris]

G'day,

Pricing on Array Solutions web site for v2.15 is now $79 for the consumer 
version.  An interesting and significant jump from a "measly $30".  If 
you're into mega stacks of long boom arrays I guess it's not an issue, for 
a couple of 3-4 el jobs, something to think about.

The indications are that it is for Win95/98, however, the demo version 
seems to run OK so far in WinXPpro.

Regards,

Mike VP8NO


----- Original Message ----- 
From: "W0UN -- John Brosnahan" <shr at swtexas.net>
To: "TowerTalk" <towertalk at contesting.com>
Sent: Saturday, January 08, 2005 2:14 PM
Subject: Re: [TowerTalk] kt34xa torque balancing


| There continues to be a LOT of misinformation and overly complex info
| floating around on how to torque balance ANY antenna.
|
| The EASIEST way to do the calculations CORRECTLY is to buy the
| YagiStress program.  A "measly" $30 and it does a LOT more.  Stop
| guessing and do it right.   $30 now may save you thousands in repairs.
|
| http://www.k7nv.com/yagistress/
|
| Or go to http://www.arraysolutions.com/Products/yagistress.htm
| to order.
|
| 73--John   W0UN